 |
Raised panel doors for my featured records storage cabinet Posted by: TomH127
Video duration: 376 seconds Homemade raised panel doors using a router bit set . Cut rail & stile blanks (Push shoe and featherboard for tablesaw used!!). Profiled with rail & stile bit. Cut & finish panel blanks using table saw & router with a spiral bit to square panels and remove saw marks; then run panels through the raised panel bit. Roman ogee bit used for the outer edges to match the cabinet. Related: cabinet, door, panel, raised, router, woodworking |
 |
Kitchen Cabinet Door Rails & Stiles Posted by: TomH127
Video duration: 150 seconds Routing rails & stiles at the router table using homemade jigs & fixtures. Did stiles in 2 passes. Related: cabinet, door, home, improvement, jig, kitchen, making, router, woodworking |
 |
Custom Kitchen Wall Cabinets Installed Posted by: TomH127
Video duration: 222 seconds Cabinets in the garage before and after staining. Next removed the old cabinets, then show the custom cabinets installed in the 9 foot space Related: cabinet, homemade, howto, kitchen, replacement, woodworking |
 |
Joinery for Kitchen Cabinet Faceframes Part 2 Posted by: TomH127
Video duration: 59 seconds Eight tenons are used for each faceframe. 2 faceframes are 42 x 36 and 1 is 24 x 36. The 24 x 36 is profiled. Related: cabinet, joinery, kitchen, woodworking |
 |
Jet Express departing Put In Bay Posted by: TomH127
Video duration: 168 seconds Jet Express III to Port Clinton 09-29-2006. The weather and calm lake waters were exceptional. Visibility was the best I have seen it. Spectacular high speed ferry ride (35 mph). The moument in the background is Perry's Peace Memorial. Related: clinton, express, ferry, high, jet, port, speed |
 |
Finishing Cabinet Panels Posted by: TomH127
Video duration: 131 seconds Am building 3 replacement wall cabinets above the sink counter. 1/2'' oak plywood panels ripped to width at the table saw - here demonstrating crosscut results from the handheld router with a spiral bit. No chip out! Take time to set and square the clamp for accuracy. Related: cabinet, kitchen, panel, router, woodworking |
 |
Rough Sanding Cabinet Top Posted by: TomH127
Video duration: 125 seconds Featured cabinet has knotted pine body & select pine trim and oak end pieces to extend the top to correct for 1/8 " short error. Raised panel doors are next (better pine rails & stiles and knotted pine raised panels) Related: cabinet, furniture, sanding, woodworking |
 |
Replacement Kitchen Drawers for 10 Dollars Each Posted by: TomH127
Video duration: 298 seconds My pressed cardboard 3 1/2 " tall drawers are worn out. I am replacing them with homemade lockjointed drawers that have 3/8" sides and backs and a 1/4" bottom. Materials are select pine sides and 1/4" birch plywood. Router table can be set for thicker side and back stock. Am incorrect saying rout right to left using the handheld. Right to left at the router table, left to right using the handheld. Related: cabinet, dado, drawer, kitchen, lockjoint, woodworking |
 |
Drawers for my Records Storage Cabinet Posted by: TomH127
Video duration: 359 seconds Step by step process. Cut the backs and sides, mortise the front, dado the sides and back, cut 1/4 bottoms. Glue and assemble. The end result is fine furniture. Related: cabinet, drawer, furniture, woodworking |
 |
Cutting dadoes for shelves using a router Posted by: TomH127
Video duration: 70 seconds I am routing dadoes in the 2 sidepanels of my featured cabinet (records storage) using 2 jigs made from 1x stock and lauan plywood that are custom fit for a 3/8 router bit. An alternative to using the table saw dado blade and can be used for large wall units. Straight cutting or spiral bit apply. Related: cabinet, dado, router, woodworking |
 |
Homemade furniture from my garage workshop Posted by: TomH127
Video duration: 105 seconds Profiling 10 peices I have built over the last 5 years. The latest is the 2 shelf oak open library completed the day of this video upload. Each project lasts several weeks. The oak raised panel doors are Mills Pride from Home Depot. Related: cabinet, furniture, homemade, library, table, woodworking, workshop |
 |
Homemade Kitchen Wall Cabinet Posted by: TomH127
Video duration: 64 seconds Used 22 plate joining biscuits and 3 dowels to attach the faceframe. The cabinet size is 42" x 36". Made 3 total - one 24"x 36" and two 42" x 36" Related: cabinet, custom, homemade, kitchen, woodworking |
 |
Records storage cabinet finally completed Posted by: TomH127
Video duration: 43 seconds Took me 4 months to build but was well worth the time taken. (Stopped working on it when the weather was too cold.) It turned out better than I expected. Related: cabinet, furniture, woodworking |
 |
Squirrel enjoying cashew snack Posted by: TomH127
Video duration: 27 seconds Squirrel in my single pot patio planter devouring cashews Related: animal, cashew, nut, squirrel |
 |
Cardinals compete for a cashew treat Posted by: TomH127
Video duration: 34 seconds My backyard cardinal pair fly to my utility room windowsill for cashew nuts! (Male vs Female) Related: bird, cardinal, window |
